14 GB
nails or clamps, to fasten the
product in place.
Avoid bending the product.
Otherwise the insulation could
be damaged.
Installation
The LED strip light
1
can be con-
nected using a connection cable
2
(Fig. B1 / B2) or without a connec-
tion cable (Fig. C).
Mounting the product
on a cupboard
Note:
Thoroughly clean the surface
on to which you intend to install the
product. The surface must be clean,
dry and free of grease. Otherwise
the self-adhesive foil may not stick
properly.
1. Using a pencil, mark the position
on the wall on to which you
intend to attach the LED light
strip
1
. If necessary, use a
spirit level as a guide.
2. Stick the double-sided adhesive
tape onto the LED light strip
1
.
Then pull the paper from the
self- adhesive foil on the back of
the LED light strip
1
.
3. Position the self-adhesive foil on
the markings and press to fix it
firmly into place (Fig. D).
100656_livx_LED-Lichtleisten-Set_content_SK.indd 14
14.07.14 12:45
Содержание 100656
Страница 3: ...3 C A 1 B1 2 B2 2 100656_livx_LED Lichtleisten Set_content_SK indd 3 14 07 14 12 45...
Страница 4: ...4 D F1 8 6 7 E 3 4 5 ca approx 20cm 100656_livx_LED Lichtleisten Set_content_SK indd 4 14 07 14 12 45...
Страница 5: ...5 F2 G2 8 6 7 G1 3 MAX 2x 3 MAX 2x 100656_livx_LED Lichtleisten Set_content_SK indd 5 14 07 14 12 45...
