13
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety
information carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Package contents (Fig. A)
1 x mobile pedestal, disassembled (1–11, 13)
1 x seat cushion (12)
1 x assembly materials (a–h)
2 x castor with brake (i)
2 x castor (j)
1 x assembly instructions
Technical data
Dimensions: approx. 45 x 54 x 58cm (W x H x D)
110
Maximum seat load: 110kg
Maximum load per drawer: 5kg
Date of manufacture (month/year):
03/2021
Intended use
The product is designed as storage furniture and
seating for indoor use. The product is intended
for private use only and not for commercial use.
Safety information
Life-threatening hazard!
• Never leave children unattended with the
packaging materials. There is a risk of suffo-
cation.
Risk of injury!
• Ensure the product is properly stabilised
before using it.
• Place the product on a level surface.
• The product may only be used under adult
supervision and must not be used as a toy.
• The product is not a toy or a climbing appa-
ratus! Ensure that persons, especially children,
do not pull themselves up on or stand on the
product.
• Release the brakes before using the product.
• Always lock the brakes if the product is not
being moved.
• Check the product for damage or wear
before each use. Only use the product if it is in
perfect condition!
• Ensure that the product has been assembled
properly and in accordance with these assem-
bly instructions. Improper assembly can lead
to injuries and impair the product’s safety and
functionality.
• Never stand on the product.
Assembly
Assemble the product with two people.
To assemble the product you require the follow-
ing tools (not included in the package contents):
a cross-head screwdriver and a hammer.
1. Place the product on a soft, flat surface.
(Warning: hard surfaces can scratch the
product!)
2. Disconnect the tracks (f1)/(f2) by pushing the
small plastic lever upwards and pulling the
tracks apart.
3. Assemble the drawers (Fig. B).
Note:
make sure that you close the eccentrics
(b). Mount the narrow tracks (f2) on the draw-
ers. The plastic hook is located at the back.
4. Fasten the tracks (f1) to the side parts (2/3)
with the screws (e) (Fig. C).
Note:
pay attention to the curvature of the
side parts. Later it will be on the top and facing
forwards. Pay attention to the alignment of the
tracks as well. The plastic stoppers on the tracks
must be at the back.
5. Mount the body as shown in Figs. D–F.
Note:
make sure that you close the eccentrics.
6. Attach the castors (i/j) to the base plate
(Fig. C).
Note:
attach the castors with brakes (i) in the
front on the base plate with the laminated edge.
GB/IE
Содержание MOBILE PEDESTAL WITH SEAT CUSHION
Страница 3: ...5 a a a a D a 4x 1 2 3 f1 f1 f1 f1 e e e e j j i i h h h h 1 1x i 2x j 2x 2 1x 3 1x e 8x f1 4x h 16x C...
Страница 4: ...6 b d d d d 3 b c c c F b 2x c 8x d 4x 5 4 d 13 13 d c b b c c 2 E 4 1x 5 1x 13 2x b 2x c 8x d 2x...
Страница 5: ...7 6 g H 6 1x g 12x d d d d c c c G c 4x d 4x...
Страница 6: ...8 J 12 I 12 1x...
