- 41 -
Press the
SET
button
(25)
to confirm the
setting.
Set
the position of D (day)/M (month) M
(month)/<->D (day), the month, the day, the
time zone 00 - (-)12, the hours, the minutes,
the 12-/24-hour time format in the same way,
the language of the weekday display
(ENG=English, FRE=French, GER=German,
SPA=Spanish, DUT=Dutch, DAN=Danish,
ITA=Italian, RUS=Russian) and the radio
reception ON/OFF.
Confirm your setting by pressing the
SET
button
(25)
. To return to the normal time
display.
Adjusting the time zone
If you are in a country where the current time
differs from the DCF77 radio signal, use the time
zone adjustment to use your device in a time zone
other than the standard-setting (UTC + 1 = Central
European Time).
Set the difference in hours (e.g., -01) to the
desired time zone.
Press the
SET
button
(25)
1 x long and then 4
x short in normal time display. The time zone
flashes and can be set with the
up
button
(26)
and the
down
button
(27)
.
Press the
SET
button
(25)
to confirm the
setting.
Press the
SET
button
(25)
repeatedly until you
return to the normal time display.
12/24-hour time format
Press the
down
button
(27)
in the normal time
display. The 12- or 24-hour time format
flashes and can be adjusted with the
up
button
(26)
and the
down
button
(27)
.
In the 12-hour time format, the display shows
AM in the morning and PM in the afternoon.
Switch on/dim display illumination
For continuous display illumination, the plug-in
power supply must be connected to the hollow
plug socket
(37)
and
to an external
power source
.
Battery operation:
Press the
SNOOZE/LIGHT
button
(8)
to turn on
the display illumination for about 5 seconds.
Mains operation:
Press the
SNOOZE/LIGHT
button
(8)
to choose
between high, low or no display illumination.
Alarm
Setting the alarm
The device has 2 separately adjustable alarm
times.
In the normal time display, briefly press the
SET
button
(25)
to select Alarm1
A1
A1
A1
A1
or Alarm2
A2
A2
A2
A2
.
When Alarm 1
A1
A1
A1
A1
or Alarm 2
A2
A2
A2
A2
is displayed,
press and hold the
SET
button
(25)
for
approx. 3 seconds to switch to the setting
mode.
The hours flash on the display.
Set the hours by pressing the
up
button
(26)
and the
down
button
(27)
.
Confirm the setting by pressing the
SET
button
(25)
.
Set the minutes in the same way.
Confirm your setting by pressing the
SET
button
(25)
. To return to the normal time
display.
