Features:
Two-slot independent charging and management system, Micro USB DC 5V input port
Battery polarity auto-detection ( Any Polarity)
Selective 500mA/1000mA/2000mA charging currents for Lithium batteries
Built-in digital tube indicator shows the real-time charging status of voltage, current, time and capacity
Identify Li-Ion and Ni-MH battery automatically
Select manually by short-press the mode button for IMR battery(3.85V Li-ion )and LiFePO4 battery(3.2V)
Activation function for 0V battery of PCM protection.
Can not charge battery with 0.0
≤
U
<
0.2V for NiMH/Cd and 1.6
≤
U
<
2.2V for Li-Ion
Over-charging and over-discharge protection
Identify broken/defective battery
Charging under constant voltage and current
Operation instruction:
There’s a ‘MODE’ button separately for each channel choosing the battery types, charging current and
charging status tracking
Long press the ‘MODE’ button for 3 seconds to change the charging current for lithium batteries,
you can change the charging current at any time
Short press the ‘MODE’ button to change the charging types of lithium batteries. If no setting, it
will default as 1.2V Ni-MH or 3.7V li-ion battery automatically. You need to change the mode for
3.85V li-ion and 3.2V LiFePO4 battery
It begins to charge the battery 5 seconds after your settings
Connect the 5V input port with USB cable inserting the
battery then the digital indicator showing the voltage with ”V”
flashing(charge starts). When no battery is inserted or
defective battery is inserted, the charger will have no any
response showing “null” ; When the battery is fully charged, it
shows “Full”
It can display the battery voltage , charge current, time and
capacity by short press the ‘MODE’ button at any time during
charging
