background image

5

BRUSH CUTTER

SAFETY

• 

Clear the area to be cut of objects such as rocks, 
toys, wire or any other debris that may be thrown or 
get tangled in the brush cutter. 

• 

Be sure the area is clear of pets and people, 
especially young children. Never assume they will 
remain where you last saw them. Stop the machine 
if any enter the area.

•  Only cut in daylight or in good artificial light.
• 

Keep in mind that the operator or user is respon-
sible for accidents or hazards occurring to other 
people or their property.

• 

Do not cut wet grass as tires may lose traction.

OPERATOR PREPARATION AND 

TRAINING

READ THE OPERATION & 

SAFETY MANUAL

• 

If an operator or mechanic 
cannot read English, it is 
the owner's responsibility 
to explain this material to them.  If any portion 
of this material is unclear, contact your factory 

representative for clarification. 

• 

Become familiar with the safe operation of the 
equipment, operator controls and safety signs.  
Be prepared to stop the engine quickly in an 
emergency.  Do not operate or allow another 
person to operate this machine if there are any 
questions about safety.

• 

All operators and mechanics should be trained. The 
owner is responsible for training the users. 

• 

Wear appropriate clothing, including safety goggles 
or safety glasses with side shields when operating.  
Wear substantial footwear and long pants.  Do not 
operate barefoot or wearing open sandals. Long 
hair, loose clothing or jewelry may get tangled in 
moving parts.

• 

Wear appropriate hearing protection.  

• 

Wear safety glasses.

• 

Never allow children, unskilled or improperly trained 
people to operate this equipment. Local regulations 
can restrict the age of the operator.

• 

Do not put hands or feet near or under rotating 
parts.  Keep clear of the front deck opening at all 
times.

• 

Never pick up or carry the unit while the engine is 
running.

• 

Keep warning labels and this operator’s manual 
legible and intact. Replacement labels and manuals 
are available from the factory.

•  Do not operate machine while under the influence 

of drugs or alcohol, or any other condition of 
impairment.

• 

The owner/user can prevent and is responsible for 
accidents or injuries occurring to themselves, other 
people, or property.

SITE PREPARATION AND CIRCUMSTANCES

 

• 

Evaluate the terrain to determine how to safely 
perform the job. Only use accessories and 
attachments approved by the manufacturer.

MULTIPLE OPERATORS

• 

Keep a safe distance between operators when 
working together.

MACHINE PREPARATION

• 

Read engine manual.

• 

Check operator presence interlock system.  Adjust 
or have any problems repaired before using.

• 

Damage to the engine can occur if there is no oil or 
oil level is low.  Check the oil level and add oil per 
engine manual as necessary.

• 

Do not tamper with or defeat safety devices. Keep 
guards, shields and interlock safety devices in place 
and in proper working condition.  They are for your 
protection.

• 

Keep all fasteners such as nuts, bolts, and pins well 
secured.

• 

Visually inspect blades, blade bolts and the cutter 
assembly for wear or damage.  Replace worn or 
damaged blades and bolts to preserve balance.

• 

Verify that machine and attachments, if any, are in 
good operating condition.

• 

Do not engage blades until ready to mow.

Содержание BRC-24 HYDRO



































Отзывы: