Tighten down all 4 corners
using a socket wrench
and a phillips screwdriver
CAUTION: DO NOT OVERTIGHTEN.
Be sure bolt engages nylon in nut
but does not extend more than
1
/
4
” (6.35 mm).
7
10
11
12
8
9
13
14
15
16
17
18
19
Set Up • Installation
Cómo ponerla en pie
Fold for storage
Plier et ranger
Cómo plegarla para
guardar
To set up table, pull up on legs and snap knuckle in
place, one leg at a time.
(6.35 mm)
Assemble locking plate to leg using bolt and wing nut as
shown. CAUTION: DO NOT OVERTIGHTEN. Be sure bolt
engages nylon in nut but does not extend more than
1/4” (see 12B). Repeat on all legs.
Store plates, bolts and wing nuts on legs
by loosely reassembling as shown.
Push down on knuckle on
all four legs and flatten
table.
Store plates, bolts and wing
nuts on legs by loosely
reassembling as shown.
CAUTION
:
DO NOT
OVERTIGHTEN.
X
4
X
4
X
4
X
4
X
4
F
E
D
F
E
D
F
E
D
I
J
M
F
E
D