Little Tikes RC WHEELZ Bumper Cars Скачать руководство пользователя страница 2

2

3

QUICK START

IMPORTANT INFORMATION

• Do not play with cars in the street or where there is vehicular traffic or in heavily traveled areas with pedestrians.
• Do not stand on, sit on or throw cars and remotes as doing so can result in injury to the person and irreparable 
  damage to the units. 
• Avoid running cars into furniture, walls, pets, people etc., as doing so may cause injury to the people and pets 
  and irreparable damage to the units. 
• Avoid driving the cars through water, mud, etc. 
• Keep long hair or loose apparel, such as shoestrings, away from the rotating wheels. 
• It is recommended to drive the cars on hardwood floor. 
• Both cars operate under different frequencies to prevent interference between the remotes and cars. 
• Keep the remote controls in range to operate cars correctly. 
• If cars run slowly, replace batteries. 
• Turn off both cars and remotes after use to conserve battery power. 
• Frequency band range is 2.400GHz - 2.480GHz. 
• Maximum radio-frequency power is 4dBm.

1

Insert the figure into the driver’s seat of 

the car. You will hear it click in place. 

Repeat for the other figure.

After turning on (I) the cars and remotes, use 

the diagram on page 3 to maneuver the cars. 

Note: The color of the remotes will correspond with the color 

of the cars to indicate which car the remote is controlling.   

3

Hit one of the four wheels of the opponent’s car. 

4

The figure will eject from the driver’s seat.

REMOTE CONTROL DIAGRAM

Press both buttons up, car will move 
forward. (Press both buttons down, car 
will reverse.) 

Press right button up, car will turn to the 
left. (Press right button down, car will 
turn backwards to the left.)

Press left button up, car will turn to the 
right. (Press left button down, car will 
turn backwards to the right.)

Press and hold buttons as shown, car 
will spin in a circle. (Press and hold 
opposite buttons, car will spin in the 
opposite direction.)

1.  To assure your car will pick up the correct frequency, switch the car ON first, then switch the remote control ON.

     (Pair the cars and the remote controls one by one.) 

2.  Place the car on the floor.

3.  Press the buttons on the remote control as shown in the diagram below.

NOTE:  When finished playing, first turn off the car, then turn off the remote control.  

PAIRING AND DRIVING

I = ON

O = OFF

I

O

I

O

2

Отзывы: