3
2
QUICK START
Place the Turtle on a flat, level surface then press the button on its back.
BATTERY INSTALLATION
Before playing an ADULT must install fresh alkaline batteries. Here’s how:
1. Using a Phillips screwdriver (not included) remove the screw and battery compartment cover
from the bottom of the Turtle. (Fig. 1)
2. Install three (3) fresh 1.5V AA alkaline batteries (not included) making sure the (+) and (-) ends
face the proper direction as indicated inside the battery compartment.
3. Replace the compartment cover and tighten the screw.
Turtle will begin walking and playing a jaunty tune.
Turtle will stop for a moment, then all sorting shapes will pop
out of its shell. Replace all the shapes into the Turtle’s shell and
play again!
2
1
1. Move the switch to the “Low Volume” or “High Volume”.
NOTE: Always turn the unit “Off” after use to conserve battery power.
2. Place all the shapes into the Turtle’s shell.
3
3 x AA Batteries
1.5V AA/LR6
1.5V AA/LR6
1.5V AA/LR6
Fig. 1
= HIGH VOLUME
= LOW VOLUME
= OFF
Tunes played are:
“Row, Row, Row Your Boat”
“Patacake”
“Lads and Lassies”
IMPORTANT NOTE:
In the event of a malfunction, reset the item by removing and replacing the batteries.
If function is still not restored, replace the batteries with fresh alkaline batteries.
