WARNING - ADULT ASSEMBLY ONLY
Handlebar must be assembled to the scooter body by an adult as per the directions on pages 2
and 3. An adult must check the assembly prior to every ride. If handlebar is not correctly
assembled child should not be allowed to use the Scooter.
STOPPING THE SCOOTER
While moving forward you can slow and/or stop the scooter by pressing down slowly but firmly
on the rear wheel fender with the heel of your shoe. (Fig. 7) This will enable you to come to a
safe stop.
CAUTION
READ AND FOLLOW SAFETY INSTRUCTIONS IN THIS MANUAL BEFORE RIDING YOUR SCOOTER.
ASSEMBLING THE SCOOTER
1. Place the scooter body on a flat, level
surface. (Fig. 1)
1. Hold the handlebar firmly and place one foot on the deck of the scooter.
2. Use the other foot to propel the scooter forward.
3. While moving forward and holding the handlebar firmly, lean slightly right or left on the
scooter deck to steer the scooter.
4. The wheels will light up as you ride.
RIDING THE SCOOTER
2
3
2. Place end of the scooter handlebar
over the body opening. (Fig. 2)
3. Slide the end of the handlebar into the
opening making sure the spring
loaded buttons on both sides of the
handlebar fit into the grooves in the
opening. (Fig. 3)
4. Press down on the handlebar
forcefully until you hear the buttons
click into place. (Fig. 4)
6. To remove handlebar press both
scooter buttons on the scooter neck
at the same time (A) and lift the
handlebar upward (B). (Fig. 6)
SCOOTER
BUTTONS
Fig. 7
Fig. 1
Fig. 1
Fig. 2
Fig. 2
Fig. 3
Fig. 3
Fig. 4
Fig. 4
Fig. 5
Fig. 5
Fig. 6
Fig. 6
OPENING
OPENING
HANDLEBAR
HANDLEBAR
5. Once assembled, lift the scooter by
the handle bar to make sure it is
locked firmly in place. (Fig. 5)
A
B
SPRING
LOADED
BUTTONS
GROOVES
