WARNING - ADULT ASSEMBLY ONLY
Handlebar must be assembled to the scooter body by an adult as per the directions
on pages 2 and 3. An adult must check the assembly prior to every ride. If
handlebar is not correctly assembled child should not be allowed to use the Scooter.
STOPPING THE SCOOTER
While moving forward you can slow and/or stop the scooter by pressing down slowly
but firmly on the rear wheel fender with the heel of your shoe. (Fig. 7) This will
enable you to come to a safe stop.
CAUTION
READ AND FOLLOW SAFETY INSTRUCTIONS IN THIS MANUAL BEFORE
RIDING YOUR SCOOTER.
ASSEMBLING THE SCOOTER
1. Place the scooter body on a flat,
level surface. (Fig. 1)
1. Hold the handlebars firmly and place one foot on the deck of the scooter.
2. Use the other foot to propel the scooter forward.
3. While moving forward and holding the handlebars firmly, lean slightly right or
left on the scooter deck to steer the scooter.
RIDING THE SCOOTER
2
3
2. Place end of the scooter handle-
bar over the body opening. (Fig. 2)
3. Slide the end of the handlebar
into the opening making sure the
spring loaded buttons on both
sides of the handlebar fit into the
grooves in the opening. (Fig. 3)
4. Press down on the handlebar
forcefully until you hear the
buttons click into place. (Fig. 4)
6. To remove handlebar press both
scooter buttons on the scooter neck
at the same time (A) and lift the
handlebar upward (B). (Fig. 6)
SCOOTER
BUTTONS
Fig. 5
Fig. 6
Fig. 7
Fig. 1
Fig. 1
Fig. 2
Fig. 2
OPENING
OPENING
HANDLEBAR
HANDLEBAR
5. Once assembled, lift the
scooter by the handle bar to
make sure it is locked firmly in
place. (Fig. 5)
A
B
SPRING
LOADED
BUTTONS
Fig. 3
Fig. 3
GROOVES
Fig. 4
Fig. 4
