5
6
CAUTION
CAUTION
electrical hazard
Do not touch
CAUTION: Heed all signs and warning labels on the blower motor.
BLOWER CAUTIONS:
• Do not open or try to service the blower. If blower needs servicing, take it to a
reputable dealer.
• Clearly mark the path of the power cord to avoid tripping and/or damage by yard
equipment such as lawn mowers, etc.
• Do not leave blower unattended.
• Do not allow blower to be used or played with by children.
• Do not cover the air intakes when the blower is being used and do not insert
small objects into any part of the blower.
•
WARNING
- Electrical Hazard - DO NOT USE EXTENSION CORDS WITH THIS
PRODUCT.
• Disconnect the blower from the power source when moving the slide.
•
WARNING
- To reduce the risk of fire or electric shock, do not use this blower
with any solid - state speed control device.
• The blower should be securely staked to the ground before use.
Blower Set Up
NOTE:
Position the blower motor perpendicular and level to the Water Park. Make sure that the blower is upright on a stable surface.
Do not place the blower in an area where it can draw up dirt, leaves and other debris. Make sure that the blower is at least 6.6 ft. (2m)
away from any structure or obstacle such as a fence, garage, overhanging branches or electrical wires.
BLOWER MAINTENANCE
• Blower must be unplugged before servicing.
• Product should be periodically examined for potentially unsafe conditions such as damaged cord, plug, housing, or parts, and
that in the even such damage is found, the product should not be used until properly repaired.
• The blower does not require any lubrication and has no user serviceable parts. Do not attempt to service the blower.
• Do not immerse the blower in water. To clean, wipe with a damp cloth.
• Regularly inspect the intake and output openings and keep free of dirt, leaves, etc.
• When not in use, store the blower indoors in a dry place.
• Store the blower upright on a stable surface.
• Loosely coil the cord and place it beside the blower.
• When in use, do not place the cord across traffic areas, water or damp areas.
• The blower is a high volume blower, capable of moving large volumes of air very quickly. Place the blower in an area where it
will not draw in dirt or leaves.
1
Attach long Air Intake Tube on the Water Park to the mouth
of the Blower Motor with the attached drawstring. Make
sure the Intake Tube is free of twists or kinks.
2
Wrap drawstring once around the
Intake Tube before tying off.
This ensures a tight seal.
Tie off the short Air Outlet Tube
tightly to make a good seal.
3
4
Inflating the Water Park
Make sure the Hose Assembly is attached to
the Water Park as shown.
Connect the Tubing to the hook and loop
closures down the side of the inflatable.
Connect the Single - Outlet
Sprayer to the top as shown
Test the Blower AC Adapter:
1. Plug GFCI into receptacle.
2. Press reset button.
3. Press test button.
4. Press reset button to us
product. Do not use if the
button fails to disable the blower.
RESET
TEST
GFCI
only
If the blower remains ON when
the “test” button is pushed, the
unit is NOT working properly.
DO NOT USE THE UNIT. Take
the unit to a certified electrician
immediately.
WARNING:
5
Re-measure minimum clearance zone prior to inflation.
6
Switch power on.
If blower does not
operate when
switched on,
press reset button
on GFCI adapter.
1
Attach the garden hose to the end
of the Tubing Assembly.
Water Park Spray Assembly, Part 1
6.6 ft. (2 m)
6.6 ft.
(2 m)
6.6 ft. (2 m)
6.6 ft. (2 m)
6.6 ft.
(2 m)
6.6 ft.
(2m)
7
Water Park will inflate in under
a minutes. Blower should remain ON to
continuously inflate the Water Park
during use. Air flow through seams is
normal (do not try repair or seal seams).
Meijer.com
