DO NOT EXCEED THE DUTY RATING OF THE LADDER. NEVER EXCEED 300 lb MAX CAPACITY OF
THE PLATFORM.
PLATFORM PRO CAN BE USED AS A TOOL TRAY ON ANY RUNG. AS A STANDING SURFACE,
NEVER CLIMB ABOVE THE HIGHEST STANDING LEVEL OF THE LADDER. ALWAYS FOLLOW THE
MAXIMUM PLATFORM STANDING HEIGHTS AS LISTED BELOW:
WARNING
ON OUTSIDE OF LADDER:
PLATFORM PRO
™
INSTRUCTIONS
(continued)
PLATFORM PRO™
SET-UP & USE
Using the platform on the inside of the ladder
1. With the adjustable arms locked in
the longer position, place the wire
hooks on the rung below the
desired platform height, then place
the plaform on the next rung up
(fig. 1). Make sure the platform is
secure in position before using.
2. It is now ready for use as either a
tool tray or a standing platform
(fig. 2).
EXTENSION MODE
STEPLADDER MODE
4TH RUNG FROM THE TOP
ALL OTHER INSTANCES
ALL INSTANCES
3RD RUNG FROM THE TOP
LADDERS WITH ACCESSORY
PORTS AND AIRDECK
WORKSTATION INSTALLED
IN HANDRAIL MODE
ON INSIDE OF LADDER:
EXTENSION MODE
STEPLADDER MODE
4TH RUNG FROM THE TOP
3RD RUNG FROM THE TOP
ALL OTHER INSTANCES
ALL INSTANCES
2ND RUNG FROM THE TOP
LADDERS WITH ACCESSORY
PORTS AND AIRDECK
WORKSTATION INSTALLED
IN HANDRAIL MODE
3RD RUNG FROM THE TOP
™
!
84007 v0 12.21 (2)
fig. 1
fig. 2
