4
PE-2.5F-PW
PARTS LIST
LISTE DES PIÉCES
LISTA DE PARTES
Item/Repere/Articulo 2
Stainless Steel Screw 8-18 x 1-1/4"
Vis Acier Inoxydable
Tornillo Acero Inoxidable
Quantity/Quantité/Cantidad (3)
P/N 902420
Item/Repere/Articulo 5
Impeller/Rotor/Impulsor
Quantity/Quantité/Cantidad (1)
P/N 118444
Item/Repere/Articulo 1
Intake Screen/Filtre d’admission/Rejilla, Toma
Quantity/Quantité/Cantidad (1)
P/N 118911
Item/Repere/Articulo 3
Volute/Volute/Difusor
Quantity/Quantité/Cantidad (1)
P/N 118357
Item/Repere/Articulo 4
Seal Ring/Joint d’étanchéité/
Anillo de Sellado
Quantity/Quantité/Cantidad (1)
P/N 928011
Figure 1 • Figure 1 • Figura 1
LIMITED WARRANTY
THIS WARRANTY SETS FORTH THE COMPANY’S SOLE OBLIGATION
AND PURCHASER’S EXCLUSIVE REMEDY FOR DEFECTIVE PRODUCT.
Franklin Electric Company, Inc. and its subsidiaries (hereafter “the
Company”) warrants that the products accompanied by this warranty
are free from defects in materials or workmanship of the Company
that exist at the time of sale by the Company and which occur or exist
within the applicable warranty period. Any distributor, sub-distributor,
recipient, end-user and/or consumer agrees that by accepting the
receipt of the products, the distributor, sub-distributor, recipient, end
user and/or consumer expressly agrees to be bound by the terms of
the warranty set forth herein.
I. Applicable Warranty Period
The products accompanied by this warranty shall by covered by this
Limited Warranty for a period of 36 months from the date of original
purchase by the consumer. In the absence of suitable proof of pur-
chase date, the warranty period of this product will begin to run on
the product’s date of manufacture.
II. Instructions Applicable to this Limited Warranty
1. Consumers wishing to submit a warranty claim must return the
products accompanied by this warranty to the point of purchase
for warranty consideration.
2. Upon discovery of a defect, any personal injury, property damage
or any other type of resulting damage, if applicable, shall be
reasonably mitigated to the extent possible.
3. At its discretion, the Company may inspect products either at its
facilities, or in the field, and after determination of a warranty
claim, will, at its option, repair or replace defective parts.
Repaired or replaced parts will be returned freight prepaid by the
Company.
4. This warranty policy does not cover any labor or shipping
charges. The Company shall not be liable for any costs or
charges attributable to any product testing, maintenance,
installation, repair or removal, or for any tools, supplies, or
equipment needed to install, repair, or remove any product.
III. Limitations Applicable to this Limited Warranty
THIS WARRANTY DOES NOT APPLY TO ANY OF THE FOLLOWING:
1. Brushes, impeller or cam on models with brush-type motors and/
or flex-vane impellers.
2. Any product that is not installed, applied, maintained and used
in accordance with the Company’s published instructions,
applicable codes, applicable ordinances and/or with generally
accepted industry standards.
3. Any product that has been subject to misuse, misapplication,
neglect, alteration, accident, abuse, tampering, acts of God
(including lightning), acts of terrorism, acts of war, fire, improper
storage or installation, improper use, improper maintenance or
repair, damage or casualty, or to an excess of the recommended
maximums as set forth in the product instructions.
4. Any product that is operated with any accessory, equipment,
component, or part not specifically approved by the Company.
5. Use of replacement parts not sold by the Company, the
unauthorized addition of non-Company products to other
Company products, and the unauthorized alteration of Company
products.
6. Products damaged by normal wear and tear, normal maintenance
services and the parts used in connection with such service, or
any other conditions beyond the control of the Company.
7. Any product that has been used for purposes other than those for
which it was designed and manufactured.
8. Any use of the product where installation instructions and/or
instructions for use were not followed.
9. Products connected to voltage other than indicated on nameplate.
INSTRUCCIONES DE SERVICIO
ADVERTENCIA
ASEGURESE DE QUE LA UNIDAD ESTE DESCONECTADA DE LA
FUENTA DE ALIMENTACION ELECTRICA ANTES DE INTENTAR
PRESTAR SERVICIO A LA UNIDAD O QUITAR CUALQUIER
COMPONENTE DE ELLA!
1. Esta unidad se encuentra lubricada permanentemente. No
se requiere lubricación. El cable que suministra la corriente a
estas unidades no puede ser reemplazado. En caso de daño,
se debe reemplazar la unidad completa.
2. En primer lugar, quite la rejilla de la toma de la bomba. La rejilla
se coloca a presión y puede quitarse tirando de ella. Luego,
quite los 3 tornillos que sujetan el difusor.
3. Limpie ligeramente cualquier corrosión o residuo que pueda
ocluir la rueda móvil. Utilice un cepillo y aceite penetrante, y
raspe ligeramente para quitar el material incrustado.
4. Dé vuelta manualmente a la rueda móvil para verificar
que gire libremente. Coloque la bomba de manera que
usted no la toque y que la rueda móvil no esté tocando
nada. Enchufe la unidad en un circuito GFCI durante 10
segundos, para ver si la rueda móvil gira: a) si gira y el GFCI
no se desconecta, desenchufe la unidad e instale las piezas
en un orden inverso a aquél en el cual se quitaron. b) Si no
rota, si la bomba desconecta los automáticos o no funciona
debidamente después de la limpieza, devuélvala a Little
Giant o a su centro de reparaciòn autorizado. NO intente
hacer usted mismo las raparaciones.
5. Cerciórese de que el cable eléctrico se encuentre en buen
estado y no tenga muescas ni cortes.
