POINT, DOUBLE CHECK TO MAKE SURE YOUR WATER SUPPLY IS
ON!!!
The heater should then fire its main burner and heat until the desired
temperature is reached. Once the temperature is reached, the main burner will
shut off and the heater will go into a standby mode with the pilot flame still
burning. If the pilot flame should ever go out, do not attempt to relight it for at
least 5 minutes to allow dissipation of any built-up gas inside the heater.
10.
If you ever smell rotten eggs, this is a sure sign you are leaking propane gas or
have a build-up of gas in the immediate area.
STOP WHAT YOU ARE
DOING AND TURN THE GAS VALVE OFF ON YOUR LP TANK
.
11.
These heaters are designed to run 600psi max unless you have the high-pressure
coil, which has the capacity of 1400psi max. Running a psi higher than the
recommended specs for your heater, even once, can result in a coil rupture and is
NOT covered under warranty. We will know if you do, so don’t…
12.
These heaters have the capacity of heating the water to 180+ degrees F, please
take any and all precautions to protect yourself, and your equipment, by following
these instructions.
For any questions or assistance in the hookup of your heater, please call us at 800-231-
6035 and ask for technical assistance. Don’t assume anything, and when in doubt call!!!
