Little Giant 10EC-CIA-RF, Руководство по установке, Страница: 3 / 48

SAFETY INSTRUCTIONS
Before Getting Started
3
High voltages capable of causing severe
injury or death by electrical shock are
present in this unit.
• To reduce risk of electrical shock, disconnect power
before working on or around the system. More than
one disconnect switch may be required to de-ener-
gize the equipment before servicing.
• This product is supplied with a grounding conductor
and grounding-type attachment plug. To reduce risk
of electric shock, be certain that it is connected only
to a properly grounded grounding-type receptacle.
Do not remove the third prong from the plug. The
third prong is to ground the pump to help prevent
possible electric shock hazard. Do not use an exten-
sion cord.
• Check electrical outlets with a circuit analyzer to
ensure power, neutral, and ground wires are properly
connected. If not, a qualified, licensed electrician
should correct the problem.
• Wire pump system for correct voltages.
• The pump has been evaluated for use with water
only. Pump should only be used with liquids compati-
ble with pump component materials. If the pump is
used with liquids incompatible with the pump com-
ponents, the liquid can cause failure to the electrical
insulation system resulting in electrical shock.
Risk of damage to pump or other equipment.
• Do not use this pump for pumping sea water, bever-
ages, acids, chemical solutions, or any other liquid
that promotes corrosion as this can result in damage
to the pump.
• Do not run pump dry. For optimal cooling and to pro-
long the motor life, the liquid level being pumped
should normally be above the top of the pump hous-
ing.
• This pump is not suitable for pond applications.
Risk of bodily injury, electric shock,
or equipment damage.
• This equipment must not be used by children or per-
sons with reduced physical, sensory or mental abili-
ties, or lacking in experience and expertise, unless
supervised or instructed. Children may not use the
equipment, nor may they play with the unit or in the
immediate vicinity.
• Equipment can start automatically. Always unplug
the pump power cord and disconnect the electrical
power before servicing the pump or switch.
• An inoperative or malfunctioning pump could lead to
flooding, resulting in personal injury or property
damage.
• In applications where property damage and/or per-
sonal injury might result from an inoperative or leak-
ing pump due to power outages, discharge line
blockage, or any other reason, an automatic back-up
system and/or an alarm should be installed.
• Do not run the pump dry. If run dry, the surface tem-
perature of the pump will rise to a high temperature
that could cause skin burns if touched and will cause
serious damage to the pump.
• Do not oil the motor. The pump’s motor housing is
sealed, and contains a high-grade dielectric oil for
heat transfer and lifetime lubrication. Use of other
oils could cause serious electric shock and/or perma-
nent damage to the pump.
• Operation of this equipment requires detailed instal-
lation and operation instructions provided in this
manual for use with this product. Read entire manual
before starting installation and operation.
• End User should receive and retain manual for future
use.
• Keep safety labels clean and in good condition.
• Keep work area clean, well-lit, and uncluttered.
• Wear safety glasses while installing or performing
maintenance on the pump.
• Do not wear loose clothing, jewelry, or anything that
may be caught in the rotating parts. Tie up long hair
and remove jewelry.