57774 v1 1.15 (3)
7. Once both feet have been removed, insert the
(new) fixed foot onto the ladder.
8. Make sure that the picked plate on the foot is
facing (down) or the back of the ladder. (As shown
in the illustration.
9. Insert the (new) bolt, washers and nut onto and
through the (new) fixed foot, as shown in the illustra-
tion.
10. Tighten using (2) 9/16” wrenches.
11. Repeat steps 9 and 10 on the adjacent foot.
12. Once all of the steps have been completed,
rotate the (new) fixed foot to make sure it rotates
freely.
9/16” Wrench
9/16” Wrench
Side View
Top View
