Little Folks Furniture Classic Hi Sleeper Bed HSP003, Руководство пользователя

Страница: 11 / 28

Connect the bed to a solid structure / wall
The bed is designed to be connected to a solid structure for extra stability.
Lift the bed into it`s final position. Using the two holes pre-drilled in the rear bed legs mark
out the drilling positions on the wall. Lift the bed away from the wall and make the holes,
making sure that you are using the correct wall fixings. Now re-align the bed, make good
the fixing and check that the bed is fitted securly to the wall.
No Fixings are provided as these will need to suit the wall type, and the length of the fixing will
depend on the wall material and any packers used to “bridge” the gap between the bed
and wall (skirting board). The two through leg holes should be adequate however further
anchor points may be required and this will depend on the bed position and wall (fixing
structure) make up.
This work should only be carried out by a compentent person or a professional.
Final check
Please position any storage furniture neatly under the upper bed as not to create ledges or
foot holds that might be used for access to the bed. Any furniture that is not used under the
bed should be individually fastened using the wall straps provided as to prevent toppling (see
their instruction leaflet). Carefull observation of safety gaps around your bed and furniture
should be maintained.
Do not attach items such as ropes, strings, cords, harnesses or belts etc to avoid the risk of
strangulation.
WARNING: Children can become trapped between the bed and wall, a roof pitch, the
ceiling, adjoining pieces of furniture (e.g. cupboards) and the like. To avoid risk of serious injury
the distance between the top safety barrier and the adjoining structure shall not exceed
75mm or shall be more than 230mm.
Wall
Skirting