Little Folks Furniture BBD001, Быстрый старт

Страница: 5 / 8

Fixing the safety panels
(illustrated with open panels )
You need: 10 x 8cm bolts and an allen key
Note ; Holes (circled) indicate the entrance for the upper bed, shown here on the
right.
If the entrance is required for the right side, fit the safety panel on the opposite
side.
Bolt both panels to the top edge of the mattress rail and the bed legs as shown.
2 x
2 x
2 x
2 x
2 x 2 x
2 x
HOLES
2 x
4 x 3.5cm
Fix the piece
You need: 4 x 3.5cm bolts, 4 x sleeve nuts and 2 x Allen keys
Orientate the piece and line up the holes. Fix the two lower bolts into the mattress
rail. Now slip 2 x sleeve nuts into the
rear of the front safety panel, align the
remaining 2 x bolts, rotate to tighten.