Lithium Grim Purple Octave, Инструкция по сборке

Страница: 7 / 8

Purple Octave v1.1
Manufacturer and product names are mentioned solely for circuit identification, and where applicable their trademarks are the
property of their respective owners who are in no way associated or affiliated with the author. No cooperation or endorsement
is implied.
7
Troubleshooting
All PCB’s have been 100% factory e-tested and out of every batch I receive I build an effect to double
check, so there should not be a connection problem on the PCB itself.
The board is not working (at all), what now?
•
Check if your 9V is plugged in correctly (and/or soldered correctly on the board).
•
Check that you oriented the capacitors, IC’s ,transistors and diodes the right way. SMF, MKT
and ceramic capacitors as well as resistors do not need to be oriented.
•
Check if you used the correct values of the components. For resistors you can look here:
http://www.diyaudioandvideo.com/Electronics/Color/
•
Double and triple check your soldering! A loose or cold solder can be really bad for your
board.
•
Replace the IC, it might be defective. Before doing that first unplug the 9V and wait for 5
seconds.
•
Check that you have good/high grade components. A lot of Chinese sourced parts are fakes
(especially high end opamps, vintage diodes and transistors) so be careful that you source
your parts from reliable suppliers.