Orange Alpaca v1.0
Manufacturer and product names are mentioned solely for circuit identification, and where applicable their trademarks are the property of their
respective owners who are in no way associated or affiliated with the author. No cooperation or endorsement is implied.
6
Troubleshooting
All PCB’s have been
100% factory e-tested and out of every batch I receive I build an effect
to double check, so there should not be a connection problem on the PCB itself.
The board is not working (at all), what now?
•
Check if your 9V is plugged in correctly (and/or soldered correctly on the board).
•
Check that you oriented
the capacitors, IC’s ,transistors and diodes the right way.
SMF,
MKT and ceramic capacitors as well as resistors do not need to be oriented.
•
Check if you used the correct values of the components. For resistors you can look
here:
http://www.diyaudioandvideo.com/Electronics/Color/
•
Double and triple check your soldering! A loose or cold solder can be really bad for your
board.
•
Replace the IC, it might be defective. Before doing that first unplug the 9V and wait for
5 seconds.
•
Check that you have good/high grade components. A lot of Chinese sourced parts are
fakes (especially high end opamps, vintage diodes and transistors) so be careful that
you source your parts from reliable suppliers.
Содержание Orange Alpaca
Страница 1: ...Orange Alpaca Building instructions v1 0...
