Lithium Grim Little Sultan of Tone, Инструкция по сборке

Страница: 5 / 7

5
Modifications

You can experiment with different diodes for D1-D6. MA856 and 1S1588 are very hard to
find and there are a lot of fakes sold from China. An alternative for MA856 is BA282 for
1S1588 there are 1N4001, BAT41, BAT46, but also think outside the box with 1n4148, 1n914
etc.

Using 2 Little Sultans of Tone are the same as the single board Sultan of Tone. The only
difference is that you’ll need to connect the 9V to both boards, but it will give you some
more flexibility when building it into the effect casing.

If you want the higher gain, then you simply need to switch out the B100k VR1 for a B250k.

You can also try different OpAmps like TL072, OPA2134, AD712, NE5532, JRC4558 etc.
Off board wiring
S
Tip
Tip
Ring
Ring
Output Jack
Input Jack
Cathode (short leg)
Anode (long leg)
Footswitch
Sleeve
R led
Cathode (short leg)
Anode (long leg)
Notice that in the “off” position the effect input is connected to ground to prevent possible
oscillation.
Blue = pin 1
White = pin 2
Yellow = pin 3