Lithium Grim ColoredThro, Инструкция по сборке

Страница: 10 / 13

ColoredThro v1.0
Manufacturers and product names are mentioned solely for circuit identification, and where applicable their trademarks are the
property of their respective owners who are in no way associated or affiliated with the author. No cooperation or endorsement
is implied.
10
Alternative Pre-gain switching
By design the Pre-gain pot (P1) remains in the circuit even when pre-gain is switched off. This may
cause some unwanted behavior of the pre gain pot. When you turn it all the way down it will cut off
all sound as it will ground the signal. If you turn it up it will add some extra resistance to ground even
when off. This may not really influence your sound, but you can alter the wiring to completely cut out
the pot when switched off. To do this I advise you to use a 3PDT footswitch. You can wire it like this:
500K
C
at
hode
(
shor
t
le
g)
Ano
de
(l
ong
le
g)
R led2
Sleeve