Lithium Grim Carnivale, Инструкция по сборке

Страница: 4 / 9

Carnivale v1.1
Manufacturers and product names are mentioned solely for circuit identification, and where applicable their trademarks are the
property of their respective owners who are in no way associated or affiliated with the author. No cooperation or endorsement
is implied.
4
Plexi version
Name Value Comment Name Value Comment
C1 370p MLCC R1 2M2 1% metalfilm
C2 4n7 MKT/WIMA/SMF R2 4k7 1% metalfilm
C3 47u Electrolytic R3 10R 1% metalfilm
C4 47u Electrolytic R4 4k7 1% metalfilm
C5 4n7 MKT/WIMA/SMF R5 4k7 1% metalfilm
C6 100n MKT/WIMA/SMF R6 1k74 1% metalfilm
C7 100u Electrolytic R7 330R 1% metalfilm
C8 100n MKT/WIMA/SMF R8 4k7 1% metalfilm
C9 10u Electrolytic R9 390R 1% metalfilm
D1 1N5817 or BAT46 R10 470R 1% metalfilm
IC1 JRC386D R11 10R 1% metalfilm
P1 NC Short pad 2 and 3
P1a B1k Gain
P2 B5k Tone
P3 A100k Volume
Try to keep the electrolytic capacitors as small/low as possible to be able to fit a 1590A! The effect
operates on only 9V DC so do not get high rated electrolytic caps as they tend to be big.
The potentiometers P1-P3 can be PCB mounted. If you prefer another layout of the pots, you can use
the old fashioned way and wire non PCB mounted jacks to the corresponding holes (see off board
wiring for more details). P1a can only be wired the old fashioned way and is not PCB mounted.
Note: R8, R9 and C9 are optional an can be left out in any version. It uses the LED anti-pop method as
stated on
AMZ Fx . If you leave it out and only want to use the LED+ pad then you should short R8 and
R9 like this: