4
ADJUSTING TELESCOPIC POLE
The overall length of the trimmer can be adjusted. Release the
clamp on the tube. The tubes can then be adjusted shorter or
longer. When the desired length is achieved, lock in place with the
clamp.
TO TURN THE TOOL ON
Push the lock button in with your thumb and then squeeze the
trigger with your fingers. (Once the tool is running, you can release
the lock button). To turn the tool OFF, release the trigger.
CAUTION
: Blade coasts after turned off.
Do not use under wet conditions.
Do not store with switch locked on.
WARNING:
To guard against injury, observe the following:
Read instruction manual before using.
Save instruction manual.
Keep hands away from blades.
Keep hands on handles. Don’t overreach.
WARNING:
Do not allow familiarity with this type of product to make
you careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WORKING POSITION - Maintain proper footing and balance and do
not overreach. Wear safety goggles, non-skid footwear and rubber
gloves when trimming. Hold the tool firmly in both hands and turn
the tool ON. Always hold the trimmer with right hand on the switch
handle and left hand on the front handle or telescopic pole if using
as a pole trimmer. Never hold the tool by the blade guard.
USING THE POLE HEDGE TRIMMER
To use the Pole Hedge
Trimmer for trimming tall,
hard-to-reach hedges or
shrubs, hold the Trimmer
at the positions shown.
Pivot the power head to
several different positions
to shape or sculpt shrubs
or hedges.
To use Pole Hedge Trimmer for trimming smaller hedges or
shrubs, hold the Pole Trimmer at the positions as shown.
To use Pole Trimmer for trimming the bottoms and sides of
hedges and shrubs, hold the Pole Trimmer at the positions
shown.
To use Pole Trimmer for trimming low-lying foliage or ground
cover, hold the Pole Trimmer at the position as shown.
CAUTION:
Do not use the trimmer for cutting stems greater
than 5/8”.
Use the trimmer only for cutting normal shrubbery found
around houses and buildings.
Do not force the Trimmer through dense growth. A slight
back and forth sawing action may ease the cutting of larger,
more dense growth. If the Trimmer begins to slow down,
reduce the rate of speed at which you are trying to cut. If the
Trimmer becomes jammed, immediately turn Trimmer off.
Remove the battery and clear the jammed debris from the
cutter blades.
OPERATING