REGULATION INFORMATION
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a class b digital device,
pursuant to part 15 of the FCC rules. these limits are designed to provide reasonable
protection against harmful interference in a residential installation. this equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. however, there is
no guarantee that interference will not occur in a particular installation. if this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/tv technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate this equipment.
(example- use only shielded interface cables when connecting to computer or peripheral
devices).
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. this transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment should be installed and operated with a minimum
distance of 20 centimeters between the radiator and your body.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
EUROPE
Lithe Audio declares that this product herewith complies with the requirements of the EMC
Directive 2004/108/EC, Low Voltage directive 2006/95/EC, Eco-Design Directive 2005/32/EC,
RoHS Directive 2011/65/EU and the R&TTE Directive 1999/5/EC when installed and used
in accordance with the manufacturer’s instructions. A copy of the full Declaration of Confor-
mance may be obtained at www.litheaudio.com/support/policies.
Lithe Audio Speakers have a standby mode or remove the power cord from the AC mains.
13
TROUBLESHOOTING
If a problem arises, please try the troubleshooting guide below. If the problem is not listed
please contact Lithe Audio Customer Service Support
Q: Speaker has not been found during setup
A:
Please check power cord is correctly connected into speaker and transformer, Check the
red light is ON. Press reset button for 5 seconds on the speaker (discoverable mode), green
light shall flash, follow the instructions for Android or AirPlay 2 setup.
*Before commencing any electrical work ensure the supply is switched OFF at the mains.
Q: Speaker connected to AirPlay 2 but not playing through device
A:
Please ensure device has good Wi-Fi strength and battery power, check the led indicator is
solid green, if not press reset button for 3 secs. Failing this, turn the speaker power off then on.
Q: Device is connected to Wi-Fi speaker but no sound
A:
Ensure your device volume is NOT muted, increase the volume within app and try again.
Restart the app which the audio is playing from and try again.
Q: Lithe Audio App not showing connected speakers
A:
Ensure your speakers green light are on, and connected as per setup. The app shall
automatically find active speakers, if not, restart app or press reset on speaker for 3 secs to
wake speaker. to show green status light.
Q: Lithe Audio App not working correctly
A:
Ensure your speaker firmware/app are up to date, OR restart/reinstall app fully.
Q: Can the speaker be installed into the bathroom ceiling.
A:
The IP rated models ‘LWF1/IP’ can be installed in zone 2 or 3 of a bathroom. Ensure you
read the saftey precautions before installation.
Warning:
Do not use the product in water or directly above the bath or shower area.
Q: I have a new router and speakers are not visible anymore
A:
If you have purchased a new router or reset the router back to defualt, you shall need to
install the speakers again. Please follow the setup procedures for IOS or Android.
For further queries and support questions please visit www.support.litheaudio.com
email us at [email protected] or via our website’s live chat service (during working
hours)
20
