The swing arm needs to be adjusted
according to the size of TV.
X= L/2+260(mm)
L:The length of TV
Remove the screws and washers using
the proper phillips screwdriver.
WARNING
• Make sure that mounting screws are anchored into the center of the studs. The use of a stud
finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined weight of the
equ
i
pment and all attached hardware and components.
4a. For Wood Stud Wall Mounting
Drill pilot holes
3
X
X
√
2
1
Find and mark the exact
location of mounting holes
3
W-A
X
7mm
4
X
X
X=TV(L)/2+260mm
W-A
7mm
2.Opening Hard the Swing Arm
1. Separating the Decorative Covers from the Wall Mount
3. Position the Swing Arm
90°
Reinstalling the screws and washers to secure
the swing arm after finishing the adjustment.
Reverse installation
Forward installation
Tighten the screw leaving a 7mm space
from the wall.
H
H
