5. Fan Assembly.
Loosen canopy set screw and lower canopy to
expose hanging bar. Separate electrical wiring
and safety cable from rubber band. Lift fan onto
j-hook hanging bracket and slide rubber bushing
over hook. Make the wiring connections as
shown in steps 6.
NOTE: The important safety precautions and
instructions appearing in the manual are not
meant to cover all possible conditions and
situations that may occur. It must be understood
that common sense and caution are necessary
factors in the installation and operation of this fan.
page 4
j-hook
hanging bracket
canopy set screw
electrical wiring
safety cable
hanging bar
canopy