5
1.
Turn off power at the circuit breaker and ensure that the
power is off before wiring.
3.
When installing without dimmer (0-10V) in wet locations:
Ensure that white/gray and blue/purple wires are each covered
with a waterproof nut (supplied). When installing in dry
locations, ensure white/gray and blue/purple wires are not
crossed.
4.
When installing dimmer (0-10V):
Connect 0-10V dimmer
wires to dimmer control with dim (+) blue/purple and dim
(-) white/gray from High Bay luminaire with waterproof nuts
(supplied). Follow fig. 1
on next page to connect 0-10V dimmer
and 120-277V power. Follow dimmer control manufacturer
instructions for more details.
2.
High Bay Luminaire should be mechanically supported by
chain or cable by securing to snap-lock hook or optional round
hook Litetronics part # HBAM20 or HBAM21 on top of fixture.
INSTALLATION PROCEDURE- BASE PRODUCT
Input 120V or 277V using 3 strip wires with or without 0-10V dimmer
Section 1
a. Connect Blue (+)/Purple
b. Connect White (-)/Gray
a. Connect Blue (+)/Purple
b. Connect White (-)/Gray