PS2-7002 2.4GHz Wireless Controller
Instruction Manual
Brief Introduction
Thank you for purchasing our PS2 2.4GHz Radio Frequency Wireless Controller. Along with
our highest manufacturing standards and testing throughout its development, we ensure you
could get the best possible product. To make it fully fits your Playstation®2 Console, please
review this user’s instruction manual carefully for operation.
Regulation Statement
The users manual or instruction manual for an intentional or unintentional radiator shall
caution the user that changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons" for the host device, and specify "The antenna(s) used for this
transmitter must not be colocated or operating in conjunction with any antenna or transmitter
other than those contained in this device."
Characteristic
1, Applicable for Sony Playstation2 Console and
various of
software the console supported;
2, Available for vibration function with two built-in motors, and Non-vibration function
without motor built-in.
3, All game software supported with Digital mode and Analog mode, performed by Red LED
4, Special device of low power consumption feature;
5, Turbo/Macro function, performed by Green LED
6, Alarm function for lower voltage;
7, FC function (Short for “Force Connection”)
between the appointed controller and the
appointed receiver;
8, Available over 7 meter straightaway range;
9, Available 20 RF controllers playing at the same time within valid range;
10, Working voltage: 3.5V – 7V (4 X AAA batteries)
