BWA BriteCor Wraparound Installation Manual
Page
4
of
4
5.
Pull out the black and white pigtail wires
through the knockout hole.
6.
Attach incoming hot wire to black pigtail
wire.
7.
Attach incoming neutral wire to white
pigtail wire.
8.
IF ZT 0-10VDC DIMMING IS INCLUDED
Connect grey and purple ZT (0-10VDC)
dimming wires to existing incoming
0-10VDC wires.
a.
Purple
–
Positive (+)
b.
Grey
–
Negative (-)
NOTE: Keep AC main power wires away
from the 0-10VDC wires.
9.
Reattach the gear tray and lens.
For warranty information and
technical support, contact us at:
434-446-1460
Find more great products at:
www.litesheet.com
