BLTL Linear Task Light Installation Manual
Page
2
of
7
NOTES
•
WARNING
–
Risk of fire or electric shock.
•
WARNING
–
It is recommended that installation be
performed by a certified electrician.
•
WARNING
–
All electrical connections must be in compliance
with local codes, ordinances or the national electrical code
(NEC). Contact your municipal building department to learn
about your local codes, permits and/or inspections.
•
WARNING
–
DO NOT connect this Luminaire to an electrical
system that does not provide means for equipment
grounding. Never use a fixture in a two-wire system that is
not grounded.
•
WARNING
–
DO NOT use excessive force when manipulating
cables and wires.
•
WARNING
–
To prevent wiring damage or abrasion, DO NOT
pinch wires between surfaces.
•
WARNING
–
Only connect luminaire to 120VAC power
outlet. It is intended for direct connection to this voltage. DO
NOT connect to a different or unknown voltage.
•
WARNING
–
DO NOT modify luminaire, plug, or mounting
hardware.
CONTENTS OF KIT
•
BriteCor Linear Task Light
•
PKG Mounting Kits (MAG and ARM)
•
MAG Magnet Mount Kit Includes:
o
(2) magnets
o
(2) M6 square nuts
•
ARM Mounting Arm Clamp Kit Includes:
o
(1) Mounting arm
o
(1) ½-20 bolt
o
(1) ½-20 threaded spacer (attached to arm)
Document #: 11-00053
Rev: -
Date: 8/31/2022
