LiteON Technology
SPH-R&D-3036S-01A
- 6 - 2.4G Mouse
Ver 0.1 <Confidential>
第
- 6 -
頁
共
15
頁
no response from mouse.
*
How to make pairing (step by step as below process) by user:
1. Insert two AA batteries to the RF Mouse, and close the battery door.
2. Plug in the dongle to the USB port of P.C. and the Access LED will flash about 2 seconds.
3. Press the ID connect button of dongle and the Access LED will flash about 15 seconds.
4. Press the ID connect button of RF Mouse for pairing with the dongle within 15 seconds.
5. The Access LED will go off and RF Mouse is ready. If Access LED is still blinking, please
repeat the above procedure 1 to 4 again.
Note :
Check the batteries power supply if pairing was unsuccessfully. Repeats pairing process step 1~5 after
checking battery power status.
4.2
Radio feature
*Table-1 Parameter of radio
Item/ Parameter
Specification
Frequency Range
2.4GHz
(2402MHz-2479MHz)
Modulation
GFSK
Channel
78 channel
Channel I.D
16bits →65,536 sets
Operation Voltage
2.2V~3.3V(BATTERY)
Battery
AA*2 batteries.
TX Power
0dBm (Typical)
Transmission rate
2 Mbps
TX FM frequency deviation
+/- 320 kHz
Frequency tolerance
+/- 30 ppm
4.3 HID function
This product offer 3 buttons mouse function.
The USB dongle is recommended to use for receiving at host PC.
