LITEMAX SLD2415, Руководство пользователя

Страница: 34 / 37

Page 34
Osd_time: You can selection the time of OSD from 2 sec. to 16 sec. D
Osd_HPos: You can move the OSD horizontally over the screen.
Osd_VPos: You can move the OSD Vertically over the screen.
Exit: back to main menu.
Factory_Reset: By pressing this, the screen will be back to the factory setting
on very beginning and lost all the personal settings.
Sharpness: You can make the characters looks sharper.
Exit
BURNIN MODE :
Factory Burn-in mode: While your VGA cable is connected on the monitor, press “Menu” and Left
and Right <” simultaneously, you will see “BURN IN MODE” on the center of the screen for 3 sec.
Then unplug the VGA cable, the screen will show Red, Green, Blue, White, and Black in sequence
automatically.
You can plug in the VGA signal cable, and re-plug the power connector to exit the burn-in mode.
KEY LOCK MODE :
OSD Lock Function: It is possible to lock all the OSD buttons to prevent unauthorized changes to
occur by pressing “Menu” and “right >” buttons simultaneously. You will see the “lock” icon below on
the center of the screen for 3 seconds. If any button is pushed after the lock function is initiated,
the below icon will appear on the screen.'
To release the OSD lock, press “Menu” and “Right >”. The below icon will appear on the center of
the screen for 3 seconds. Now all OSD keys are active again.