Litemax Electronics ALF1051, Руководство пользователя

Страница: 20 / 21

(2) The protection film is attached to the polarizer with a small amount of glue. If some
stress is applied to rub the protection film against the polarizer during the time you
peel off the film, the glue is apt to remain on the polarizer.
Please carefully peel off the protection film without rubbing it against the polarizer.
(3) When the module with protection film attached is stored for a long time, sometimes
there remains a very small amount of glue still on the polarizer after the protection
film is peeled off.
(4) You can remove the glue easily. When the glue remains on the polarizer surface or its
vestige is recognized, please wipe them off with absorbent cotton waste or other soft
material like chamois soaked with normal- hexane.
A. Optical Characteristic Measurement Equipment and Method
Topcon BM7 or
equivalent
Field = 1
°
Optical Stage(x,y)
LCD Module
500mm
B. Luminance
<measuring point for luminance variation> <measuring point for surface luminance >
10mm from
the left edge
10mm from
the right edge
10mm from the
bottom edge
9 8 7
6 4 5
3
10mm from
the top edge
512
384
1 2
512
384
Page 20