LiteGait 300 Deluxe, Руководство по сборке

Страница: 4 / 8

Lite Gait® Assembly
Tools Required:
Scissors
1/2 inch socket or open-end wrench
5/16 inch Allen wrench (provided)
Lite Gait® I Assembly Instructions:
Read below & follow pictures.
NOTE: Two people are required for safe assembly.
NOTE: Your LiteGait® may look different than the following
images.
1.) After removing the
shipping carton, examine
the LiteGait® and report any
damage to immediately to
Mobility Research Service &
Parts Department at 800-332
-9255 EXT 7104.
3.) Open the cardboard box
containing the following:

Rechargeable Battery

Battery Charger

Harness & Harness
Accessories

BiSym (Optional)
2.) Loosen handlebar knobs
and raise handlebars to allow
access to the enclosed
cardboard box.
NOTE: If you have any questions during installation, please
contact Mobility Research Service Dept. for assistance.
CAUTION: DO NOT USE
UTILITY KNIFE TO OPEN BOX
4.) Inspect contents of
harness and accessories box
for damage.
5.) Carefully cut all black
plastic straps securing base
to pallet.
6.) Using two people, remove
base from pallet.
7.) Position base over pallet
with actuator near base as
pictured.