III
OPERATION
♦
This device is plug`n`play – this means it can be used without extra
components like DMX-controllers or dimmer units. Just connect the
included PowerCon cable to a convenient power supply like specified in this
manual. It is possible to connect multiple units to the PowerCon outlet.
Depending to the used cables in your application up to 20 units can be
driven from a 10 amps breaker circuit.
NOTE!
NEVER use the unit connected to an electronic dimmer unit. The unit can be
badly damaged. Optional mechanical dimmer units or LEE gels are
available to control the light output.
TECHNICAL SPECIFICATION
voltage
100-240 V, 47-63 Hz
power consumption
0.46 A @ 230 V
measurements
271 x 221 x 304 mm
weight
4.8 kg
fuse
T3.15 A @ 250 V
