6-
Note: After finishing the current programming operation, you can hold RELEASE/CLEAR button to
clear all the output before next step operation.
4-2.2 Scanner Copy
This function allows you to copy the settings of one scanner to another.
1. Press PROGRAM/REC button to enter program mode.
2. Press the fixture(scanner) button you want to copy
3. Hold the MODE button, tap the Fixture (Scanner) button you want to copy to. The corresponding LED
indicators will flash three times fast. Then the copy is successful.
Note: After finishing the current programming operation, you can hold RELEASE/CLEAR button to
clear all the output before next step operation.
4-2.3 Delete a Scene
1.
1) Press PROGRAM/REC button to enter program mode.
2. Press the FIXTURE/SCENE button, then the LED indicator above it will flash.
3. Press PAGE button to select page that the scene which you desire to delete is in.
4.
4) Hold the DEL button and the Scene button to delete the scene that you’ve stored (When selecting the
page, the related LED indicators will show you whether there is a scene stored). The LED indicators on
the panel will flash three times fast, which means delete the scene successfully.
Note: After finishing the current programming operation, you can hold RELEASE/CLEAR button to
clear all the output before next step operation.
4-3 Programming Chase
This function will allow you to store up to 1000 steps into one chase (The max. steps is 1000 for the whole
set).