DP-8DA [EUM-C]
6
2 Operations
2-1 ID NO. Set
Each device has a unique ID NO., when single device is used, ID NO. do not need to be adjusted;
when several devices are used, various ID NO. need to be adjusted to normally operation.
Press【FUNC】to enter menu, press【▲】/【▼】to select
F1：SET ID
. Press【ENT】to enter ID NO.
selection and press【▲】/【▼】to increase/decrease ID NO., Press【ENT】to save and exit.
ID No. can be set to 255(Max.).
2-2 Scene Edit
Press【FUNC】to enter menu, press【▲】/【▼】to select
F2：EDIT SC
. Press【ENT】to enter SC
selection and press【▲】/【▼】to select SC. Press
【
▶
】
to set channel and press 【▲】/【▼】
again to set channel. Press【ENT】to save and exit.
DP-8DA is able to set 6 sets of scenes that can control 8-channel outputs.
2-3 Channel Set
Press【FUNC】to enter menu, press【▲】/【▼】to select
F3：EDIT CH
. Press【ENT】to enter channel
selection and press【▲】/【▼】to select, press
【
▶
】
to channel setting, and press【▲】/【▼】
to increase/decrease the channel value.
2-4 DMX address set
Standard DMX front edge can output 512 channels, but DP-8DA intercepts consecutive 8
channels to output from them. The number of the 1
st
channel is called start channel address.
Press 【FUNC】to enter menu, press【▲】/【▼】 to select
F4：SET DMX
. Press【ENT】to enter
DMX address edit state, press【▲】/【▼】 to select the desired DMX, and press【ENT】to save and
exit.
NOTE: DMX setting range is 001-512.
