ISO 9001 CERTIFIED www.liteputer.com.tw
5 Lite-Puter
AX-1205[CUM-C]
STEP-3 Press
▲
or
▼
to adjust warm up value (range from 0%-9%)and LED will
display,
Now the 1
st
channel’s warm up value is 3%.
2-6 Channel Dimming/Non-dimmming Mode Setting
STEP-1 Hold
FNC
till LED displays,
It means that all channels are set as dimming mode (AL stands for all channel; d
stands for dimming).
STEP-2 Press
◄
or
►
to select a channel and LED will display,
It means that the 1 st channel is set as dimming mode.
STEP-3 Press
▲
and LED displays,
Now the 1 st channel is set as non-dimming mode( S stands for switch=non
dimming).
2-7 Channel Dimming Value Check
STEP-1 Hold
FNC
till LED display,
If a channel set as non-dimming mode, when the dimming value higher than
50%, it will switch on at 100%; when the dimming value lower than 20%, it will
switch off.
