Please note, each female and male connection have arrows on the ends. Please align the
arrows for a proper connection.
BLUETOOTH SETUP
1. Download the Magic Light app on the Play Store or the App Store.
2. Before you can connect to the app, the Rock lights will need to be connected to power (12V)
and ground. As soon as power is supplied, open the app and follow the instructions as follows.
3. Scan for available devices.
-
Look for LEDBLE-(Controller #)
-
Click “Connect” and set the settings according to the picture below.
4. Once you confirm the settings, click “Connect” again.
INFORMATION
1.
Before mounting your Rock Lights, connect each pod to one of the connections on the splitter.
With a 12V power source, thoroughly test your kit and make sure everything is working correctly.
PLEASE make sure you have the correct settings on the controller. If you do not, the colors will
be off.
WARNINGS
1. Cutting, splicing, or any other tampering with the LED pods, wires, or controller will void
the warranty.
2. Adding your own wires to the Bluetooth Controller and driver will void the warranty.
3. If you have a degrading/weak battery, please replace your battery before installing your
kit.