Listen SoundConnect 2, Руководство пользователя

Страница: 18 / 27

12 Operation SoundConnect 2
TM
Manual
Connection Diagrams
Lemo Connector Microphones
Microphone requiring polarization voltage
SoundConnect 2 can be used with microphones and preamps requiring polarization voltage. Polarization
voltage can be set via the front panel controls or through Message Steps in a SoundCheck sequence.
Message Step control requires SoundCheck 14 or later.

Set the microphone input type to MicLemo . See
Channel Settings Mode on page 4

Set the microphone gain. See
Channel Settings Mode on page 4

Set the polarization voltage. See
Setup Mode 1 - Channel on page 6
SCM Microphone with Lemo adapter
When connecting a Listen SCM mic to the Lemo input (optional board required) using the Microdot to Lemo
adapter P/N 4013: (See
Figure 3-3
)

Set the microphone input type to MicLemo . See
Channel Settings Mode on page 4

15V DC supply voltage is always present on Lemo the connectors so no Bias setting is needed

IEPE and Pol. should be set to No Bias

Set the microphone gain. See
Channel Settings Mode on page 4
SCM or Polarized Mic
SCM or Polarized Mic
SoundCheck
Computer
Audio Interface
Chan 1 In
Chan 2 In
USB
Front
Panel
Back
Panel
External
DC
Power
Adapter
Each SCM Microphone Requires:
1) Microdot to Lemo adapter P/N: 4013
to connect to Lemo input
MicLemo
- 1 0 d B + 1 0 d B
MicLemo
Figure 3-3: Lemo Microphones