LISTENRF SETUP
Setting up Transmitter
1.
Connect Antenna
If using the LT-803, remove the rubber
plug on the top of the unit and
connect the antenna. If using the
LT-800, connect the antenna to the
back of the unit.
Connect Power
Plug the power supply into the power
connector on the back panel, then
into an outlet. Turn on by pressing the
power button.
Connect Audio
There are two audio inputs; input 1 is
a balanced connection using either an
XLR or 1/4” phono connector. Input 2
has two unbalanced mixing RCA
connectors.
Connect Dante Audio Adapter with
Audio (optional)
If you are using the Dante Audio
Adapter, connect the RJ45 network
cable into the Dante Adapter & plug
one of the XLR outputs to input 1 on
the LT-800/803 & the other XLR
output into the LW-100P server. An
LA-507 will be required to make the
connection.
Audio Source
RF Transmitter
Power Input
Antenna Output (LT-803)
Antenna Output (LT-800)
RJ45 Network Cable
Dante Audio Adapter
Network
Audio Source
RF Transmitter
Setting up Receivers
LR-4200 & LR-3200
For further customization, view the QSGs (quick start guides) and manuals found at
www.listentech.com/support/manuals
Power
To turn on the iDSP receiver, hold the
button for one second.
Plug in Headset
Adjust Volume
To desired level.
The receiver is charged with a micro
USB charging cable provided with the
system. When connected to the
charger, a blinking light indicates it is
being charged and a solid light
indicates a full charge.
1.
2.
3.
LISTEN TECHNOLOGIES
14912 Heritage Crest Way, Bluffdale, Utah 84065-4818 USA
Phone:
+1.801.233.8992
Toll-Free:
1.800.330.0891
www.listentech.com
Copyright © 1998 - 2018 Listen Technologies Corporation. All rights reserved. 09
24
201
9
-V
4
100P LE Server
2.
3.
OR
Micro-USB
Charging Port
Power
Adjust Volume
