Listen AudioConnect Series, Руководство пользователя, Страница: 9 / 27

Installation
AudioConnect
TM
Manual
3
Installation
Windows
- AudioConnect uses a standard Windows WDM driver. Just connect to the SoundCheck
computer with the USB cable provided and the driver will install automatically.
Mac
- AudioConnect uses a native Core Audio driver. The device is recognized after connecting with the
USB cable provided.
The AudioConnect Controller driver is included with the installation of SoundCheck 14 and later.
Important! SoundCheck 14 or later is required to control AudioConnect.
NI Visa
NI Visa is required for Listen Hardware such as: AmpConnect, AudioConnect and SoundConnect 2. It is
automatically installed with the SoundCheck installer for Windows and must be manually installed for Mac
OS.
Hardware Editor
Default values for the SoundCheck Hardware Editor are shown below.
Auto Mode
As of SoundCheck 14, the Hardware Editor in SoundCheck can automatically read the Vp values from
AudioConnect when the editor is set to Auto Mode. Please refer to the SoundCheck Manual Hardware
Editor chapter for more information on Auto Mode.
Important!
The Output Channel Vp values read are for Balanced Connection. For Single
Ended (Unbalanced) Connections, uncheck Auto in the Hardware Editor.
Open the Hardware Editor from
the SoundCheck Main Screen.

Click
Refresh
to update
the
Device Field
. The
fields should now show
your device serial
number.
Balanced vs Single Ended
Vp Values
The example in
Figure 2-1
shows the Output Vp value when
using Balanced Line, 1/4” Tip-
Ring-Sleeve (TRS) connectors.
The Vp value on Outputs 1 and 2
is 4.4 V
.
Important! When using Single Ended connectors (1/4” Tip-Sleeve unbalanced), the
Output Vp values are reduced by half as shown in Figure 2-1, on Channel
Name - SnglEnd Out 1 and 2; e.g., [4.4 V / 2 = 2.2 V]
Figure 2-1: Balanced Output Values