Listen AudioConnect Series, Руководство пользователя

Страница: 16 / 27

Operation
AudioConnect
TM
Manual
10
Back Panel
Line In

1/4” Balanced TRS connector

Can also be used with Single Ended
connections
Line Out

1/4” Balanced TRS connector

Can also be used with Single Ended
connections
Note:
Single Ended Output connections require a different Output Vp value in the SoundCheck
Hardware Editor. See
Hardware Editor on page 3
.
S/PDIF In/Out

Currently not available for use
USB device Connector

USB-B connector for connection to computer
USB Hub Connector

The USB Full Speed connector is for: Hardware Keys, keyboards, mice and control of devices such
as SoundConnect 2. It is not for use with hard drives, memory sticks or audio interfaces.
Internal USB Hub Connector

The USB Hub inside the case can be used for the SoundCheck USB Hardware Key
Note:
Any steel cable or ball chain used to secure hardware keys and ID tags must be
removed before securing the hardware key in the AudioConnect chassis.
Power In Connector

24 VDC 0.5 A

Use only the approved DC supply provided by Listen, Inc.
Recommended Cable Length

All cables used for AudioConnect should be no longer than 3 meters (9.9 feet)
In Out
Figure 4-5: Back Panel