Listen AudioConnect Series, Руководство пользователя

Страница: 12 / 27

6
AudioConnect
TM
Manual
Headphone Amp Calibration
Calibration Procedure
1. Open the Calibration Editor as shown in
Figure 3-3
2. In the Output Signal Path field select
Headphone Amp L (default name)
3. Under Calibrated Output Device, Click
Add
and enter the name for the device:
AudioConnect Headphone Amp L.dat
4. Make sure the HW Output Channel is
correct. The default hardware channel is
Output 1.
5. Under
Input Signal Path
select the channel
that the output of the AudioConnect
Headphone Amp L is routed to.
6. Click
Calibrate Device
. When prompted
with wiring instructions, use the example in
Figure 3-2
. Follow the sequence prompts,
clicking
Enter
to continue.
7. When the Amplifier Calibration process is
complete the display shows the response
curve of the headphone amp and the
measured gain. Click
Enter
to finish the
sequence. The gain value is automatically entered in the
Sensitivity
field as shown in
Figure 3-3
.
Select
dBV
to see the gain in dB.
8. Repeat the above procedure for the right headphone amp channel.
Figure 3-3: Calibration Editor