20
Auto Off
30 Minutes (default): Turns the Transceiver off after 30 minutes of inactivity (no link to Leader).
20 Minutes or 10 Minutes: Turns the Transceiver off after 20 or 10 minutes of inactivity.
Off: Disables the Auto Off function.
Jacksense
On (default): Turns on the Transceiver when a headset is connected to the Headset/Microphone Port; turns
off the Transceiver when the headset is disconnected.
Off: Control the Transceiver’s on/off status manually.
Sidetone
Normal (default): A talker hears their own voice at a normal level in their own headset.
Quiet or Loud: Decreases or increases the level of a talker’s voice in their own headset.
New Pair Key
This menu choice – which only functions on a Leader - controls ListenTALK New Pair Key security.
Please see ListenTALK Security on Page 18 for a discussion of this menu choice.
Mode Select
Use Leader Clip (default): You must insert a Leader Clip to convert a Transceiver into a Leader.
Force Leader: Converts a Transceiver into a Leader without a Leader Clip.
Language
English (default): The default language for the Menus is English.
Espanol, Duetsch, Français; Presents Menus in Spanish, German or French.
Reset Device
No (default): Maintains existing menu choices, Group name and Pair Key.
Yes: To reset the ListenTALK to all factory default settings, choose Yes.
LISTENTALK DOCKING STATION OPERATION (SEE PAGES 9 - 10)
The ListenTALK Docking Station operates as a charger and programming station and provides convenient
storage for ListenTALK Transceivers. Mount the Docking Station on a flat surface. Connect the Power Supply to
the Docking Station and to any standard AC outlet (100/240 VAC, 50/60 Hz). Place ListenTALK Transceivers into
the Leader and Participant Pockets to charge and program the Transceivers.
Creating a ListenTALK Group with the Docking Station
To create a Leader, or Sub-Leader snap a red Leader Clip onto any Transceiver. Omit the Leader Clip from
Participant ListenTALKs. Place the Leader in the Docking Station’s red Leader Pocket. Place Sub-Leader(s) and
Participants in the Docking Station’s black Participant Pockets.
To create a Group, Pair the Leader with Sub-Leader(s) and Participants by pressing the Pairing Button
momentarily on the Docking Station. The Pairing Indicator will flash during pairing, then turn solid and finally
extinguish when the pairing process is completed.
