LISTENIR SETUP
Connect Power
Plug in the power cable & flip the
“power switch” to the desired
position.
Connect Audio
Connect audio from sound system
with an RCA or balanced terminal
block to input 1. Adjust level
control to be in the green level
with occasional red peaks.
Audio Source
LT-84 Transmitter
Power Switch
Power Input
Connect Dante Audio Adapter with Audio (optional)
If you are using the Dante Audio Adapter, connect the RJ45 network cable into the Dante Adapter & plug
one of the XLR outputs to input 1 on the LT-84 & the other XLR output into the 100P LE server.
OR
Setting up Transmitter
Setting up iDSP Receivers
Power
To turn on the iDSP receiver, hold
the button for one second.
Plug in Headset
Adjust Volume
To desired level.
The receiver is charged with a
micro USB charging cable provided
with the system. When connected
to the charger, a blinking light
indicates it is being charged & a
solid light indicates a full charge.
For further customization, view the quick start guides & manuals found at
www.listentech.com/support/manuals
Micro-USB
Charging Port
Power
Adjust Volume
1.
2.
1.
2.
3.
LISTEN TECHNOLOGIES
14912 Heritage Crest Way, Bluffdale, Utah 84065-4818 USA
Phone:
+1.801.233.8992
Toll-Free:
1.800.330.0891
www.listentech.com
Copyright © 1998 - 2018 Listen Technologies Corporation. All rights reserved. 20200618
Dante Adapter
Router/Switch
100P LE Server
LT-84 Transmitter
Audio Source
Wireless Access Point(s)
Dante Audio
Ethernet
