Listen Technologies 863.050 Скачать руководство пользователя страница 16

Страница: 16 / 84

Design Guide

Test Tone

Use the test tone to transmit a 400 Hz tone. This tone will allow the end user to know if the system is transmitting

properly. All receivers should be able to hear this tone if tuned to the proper channel.

Selecting Transmitting Frequencies

Use this section of the guide to choose the channel settings for the transmitter and receivers.

Find transmission channel(s)

The goal is to fi nd a transmission channel(s) that is free from interference. Interference comes from other

transmitters and from other equipment (such as a computer).

Listen’s LT-800-863 off ers 17 diff erent channels to choose from

Listen’s LT-800-863 offers 17 different channels to choose from. This increases the chance you’ll fi nd an

interference free channel. The best way to check for interference is to turn a receiver on and press the SEEK

button. If there are any channels with interference, the receiver will fi nd these channels. Do not transmit on

these channels.

Testing System

Monitor Jack

The headphone jack is used to monitor the mix of input 1 & 2. You can adjust the monitor level with the volume

knob. The headphone jack is a standard 3.5 mm jack.

Key Concepts in Designing a Stationary FM System

Test Tone Button

Headphone

monitoring jack

Содержание 863.050





















































































Результаты поиска

Содержание 863.050

Отзывы:

Похожие инструкции для 863.050

Бренды по названию

Популярные бренды

Listen Technologies 863.050, Руководство пользователя

Результаты поиска

Содержание 863.050

Отзывы:

Похожие инструкции для 863.050

Бренды по названию

Популярные бренды