Lissmac SBM-M 1000 D2, Руководство по эксплуатации

Страница: 31 / 55

Operation
5.7. Turning on the machine
Before turning on the machine, the following conditions must be checked:

Acceptance of the workpieces at the output side of the machine is
ensured.

Contaminants (material residue) have been removed from the magnets.

Workpieces remaining in the machine
(visual inspection on the conveyor belt) have been removed.

Power-pin belts are checked for damage (visual inspection).

Place the main switch
(11)
on the back of the machine into the "On"
position.

The power supply for the drives is turned on.

Make sure that all malfunctions are corrected.

Ensure that both »EMERGENCY STOP«
buttons (10)
and
(17)
are
disengaged.

The machine is ready for operation.
Before slag removal can begin, the following pre-requisites must be met:

The sheet thickness of the workpiece is measured and set on the
machine.

Feed speed is set.

Top and bottom machining units are correctly positioned.
Deslagging machine SBM-M 1000/1500 D2 31