Lissmac CDM 46 W Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 30

Lissmac CDM 46 W Скачать руководство пользователя страница 29

29/30

Translation of the original explanation of incomplete machine

The LISSMAC core drill motor CDM 46 and CDM 63 can/may only be used with a LISSMAC
core drill stand. The commissioning is not allowed until it is established that the core drilling
motor and the core drill stand meet the intended use. Any other use is considered not
intended use.

Assembly instructions:
Connect the core drill motor with the core drilling stand using the Quick-Loc.

This explanation of incomplete machine is valid for the following machine:
LISSMAC Core drill motor CDM 46 W and CDM 63 W.

This declaration relates exclusively to the machine in the state in which it was placed on the
market, and excludes components which are added and/or operations carried out
subsequently by the final user. It is confirmed that the machine conforms to the relevant
provisions of Directive 2006/42/EC.

Manufacturer:

LISSMAC Maschinenbau GmbH
Lanzstrasse 4
D-88410 Bad Wurzach

Technical documentation retained by

LISSMAC Maschinenbau GmbH, Lanzstrasse 4, D-88410 Bad Wurzach.

Description of the
machine

Core drill motor CDM

CDM 46 W

CDM 63 W

Voltage

400 V

400 V

Rated power:

4600 W

6300 W

Scope of performance:

3300 W

4350 W

Rated current:

8.5 A

11 A

Drill motor holder:

Universal mounting plate

Max. core drill Ø, mounted on drilling stand:

400 / 220 / 150 mm 500 / 320 / 210 mm

Weight:

24 kg

27 kg

Measured noise power level:

115 dB

118 dB

Guaranteed noise level LWA:

116 dB

119 dB

Harmonised standards:

EN 12348:2000+A1:2009
EN ISO 12100:2011-03
EN 60204-1; VDE 0113-1:2007-06

Legally binding
representative:

LISSMAC Maschinenbau GmbH
Gewerbepark West

Lanzstrasse 4
88410 Bad Wurzach
Tel.: +49 (0) 7564 / 307 - 0
Fax: +49 (0) 7564 / 307 - 500
Mail: [email protected]
www.lissmac.com

Bad Wurzach, May 20, 2015

...........................................

by proxy Marcel Hofstetter
(Head of Development Construction Technology)

«
...
27
28
29
30
»

Содержание CDM 46 W































Отзывы:

Нет отзывов